Recessed

Energetic Lighting's E3DL 4"| 5/6" Smooth downlights are designed to easily upgrade your existing 4" or 5/6"inch recessed fixture affordably and ca...

Energetic Lighting's E3DL 4"| 5/6" Smooth downlights are designed to easily upgrade your existing 4" or 5/6"inch recessed fixture affordably and ca...

Energetic Lighting's E3DL (6") beveled downlights are designed to easily upgrade your existing 4-inch recessed fixture affordably. The E3DL series ...

4" FLAT wafer can-less LED downlights feature a non-metallic trim for corrosive environments. Can-less downlights are easy to install in new constr...

Energetic Lighting's E3DL (4" retrofit downlights are designed to easily upgrade your existing 4-inch recessed fixture affordably and can be as sim...

Dedicated remodel housing for use in insulated ceilings can be in direct contact with insulation. Air-tight construction provides energy savings by...

Mud Ring for 2" M2 Trimless LED Downlight Features Size: 2" Allows 2" M2 canless round trimless to be installed without any housing, exposed...

Energetic Lighting’s E1DL DISK LIGHT has aclassic, low-profile design that allows you to have a stylish look with efficient lighting.Smooth dimming...

New construction frame-in with collar for 2″ M2 LED Recessed Series. Used for pre-wiring and easier layout planning. Features Mounting: Bar hanger...

Features Housing only. Trim required - sold separately. Size: 4" Type: IC Remodel Voltage: 120V Lamping: Depends on trim selection Dimming: Triac ...

This 6” sturdy retrofit downlight facilitates effective, convenient, and elegant illumination. A compact profile and beveled baffle make for a glar...

This 6” sturdy retrofit downlight facilitates effective, convenient, and elegant illumination. A compact profile and beveled baffle make for a glar...

Onyx 4"Tunable White Retrofit Series include an integral tunable CCT switch. Spun aluminum construction provides clean sharp edges and is suitable ...

Energetic Lighting’s E3DLB series retrofit downlight containing an integrated nightlight ring to provide an additional functional mode. Features F...

AC Onyx 5”/6” Retrofit Series requires no driver and allow for a sleek design. Spun aluminum construction provides clean sharp edges and is suitabl...

4” AC Onyx Retrofit Series requires no driver and allow for a sleek design. Spun aluminum construction provides clean sharp edges and is suitable f...

4” AC Onyx Retrofit Series requires no driver and allows for a sleek design. Spun aluminum construction provides clean sharp edges and is suitable ...

Features Housing sold separately. Size: 4" Trim Style: Baffle Lamping: LED Wattage: 10W Lumens: 650 lm Voltage: 120V CRI: 90+ Aperture: 3-3/4" Col...

Suction cup assist removing trimless reflector from finished ceiling after installation. For maintenance on trimless reflector. Features Assist re...

Features Square stainless steel, field changeable trim. Requires NM1-170 Finish: Black, Brushed Nickel, White Compatible Fixture (Sold Separat...

Features Round stainless steel trim for NM1-170. Easy install to threaded LED module, no tools are required Finish: White Compatible Fixture ...

Features Round louver stainless steel, field changeable trim. Requires NM1-170 Finish: Black, Brushed Nickel, White Compatible Fixture (Sold S...

Features Round hexcell louver, field changeable trim. Requires NM1-170 Finish: Black, Brushed Nickel, White Compatible Fixture (Sold Separate...

Features Round scoop stainless steel trim for NM1-170. Easy install to threaded LED module, no tools are required Finish: Black, White Compat...

Features New construction frame-in can be used to assist installing can-less recessed downlighting. Helps indicate wiring location and cutting ...

Features Extension cables are used to extend the length between luminaire and driver enclosure. Can be connected together to create custom leng...

Features Extension cables are used to extend the length between luminaire and driver enclosure. Can be connected together to create custom leng...

Features Converts the round downlight included with 1″ M1+ LED downlight into a square downlight Finish: Black, Bronze, Matte Powder White Di...

Features 24″ Hardwire Power Feed used to connect (1) NM1 LED module to a 12V LED driver. (1) Included with 12W Driver (NM1-DVR12), Splitter Cable ...

Features For new construction pre-wiring and easier layout planning Compatible Fixture (Sold Separately): Recessed Downlight: NM1-170 Doc...

An extension cable is used to extend the length between the luminaire (NM1-170) and a compatible 12V LED driver. Cables can be connected together t...

5"/6" Oversize Ring for NOXTW-5631 or NOXAC-5631 Features Recessed Size: 5"/6" Finish: White Round oversize ring covers large ceiling cut-outs up ...

5"/6" Eyelid for NOXTW-5631 or NOXAC-5631 Features Recessed Size: 5"/6" Finish: White Round eyelid clips on reflector or baffle to convert into ha...

5"/6" Baffle Insert for NOXTW-5631 or NOXAC-5631 Features Recessed Size: 5"/6" Finish: Black, White Round baffle insert is field changeable used t...

5"/6" Reflector Insert for NOXTW-5631 or NOXAC-5631 Features Recessed Size: 5"/6" Finish: Black, Clear Diffused, Haze Round reflector insert is fi...

4" Oversize Ring for NOXTW-431 or NOXAC-431 Features Recessed Size: 4" Finish: White Round oversize ring covers large ceiling cut-outs up to 5-7/8...

4" Eyelid for NOXTW-431 or NOXAC-431 Features Recessed Size: 4" Finish: White Round eyelid clips on reflector or baffle to convert into half moon ...

4" Baffle Insert for NOXTW-431 or NOXAC-431 Features Recessed Size: 4" Finish: Black, White Round baffle insert is field changeable used to conver...

Energetic’s E2DLS series is an ultra slim profile for a broad range of modern or contemporary style commercial applications or general lighting. In...

4" Reflector Insert for NOXTW-431 or NOXAC-431 Features Recessed Size: 4" Finish: Black, Diffused Clear, Haze Round reflector insert is field chan...

Features ELO can be mounted to a 5″ or 6″ recessed housings with torsion springs brackets using optional torsion spring kit. Compatible Fixtu...

6″ Decorative metal ring changes the appearance of the LED luminaire. Features Finish: Black, Brushed Nickel, Warm White Compatible Fixture (S...

4″ Decorative metal ring changes the appearance of the LED luminaire. Features Finish: Black, Brushed Nickel Compatible Fixture (Sold Separate...

Metal decorative rings changes the appearance of the LED luminaire. Rings are held in place with integral magnets and seamless appearance with no v...

Metal decorative rings changes the appearance of the LED luminaire. Rings are held in place with integral magnets and seamless appearance with no v...