Recessed Accessories

Round hole cutter is a versatile tool that every installer and contractor should have. Fully adjustable to fit virtually every recessed requirement...

Mud Ring for 2" M2 Trimless LED Downlight Features Size: 2" Allows 2" M2 canless round trimless to be installed without any housing, exposed...

Features Recessed Size: 6" Finish: White Dimensions: 8.06" W x 0.09" H Inner diameter of 6.38 in. Documents Spec Sheet

Extension cables are used to extend the length between luminaire and driver enclosure. Features Cable Length: 4' Can be connected together to crea...

New construction frame-in with collar for 2″ M2 LED Recessed Series. Used for pre-wiring and easier layout planning. Features Mounting: Bar hanger...

Features Square stainless steel, field changeable trim. Requires NM1-170 Finish: Black, Brushed Nickel, White Compatible Fixture (Sold Separat...

Features Round indicator stainless steel, field changeable trim. Requires NM1-170 Finish: Black, Brushed Nickel, White Compatible Fixture (Sol...

Features Round stainless steel trim for NM1-170. Easy install to threaded LED module, no tools are required Finish: White Compatible Fixture ...

Features Round louver stainless steel, field changeable trim. Requires NM1-170 Finish: Black, Brushed Nickel, White Compatible Fixture (Sold S...

Features Round hexcell louver, field changeable trim. Requires NM1-170 Finish: Black, Brushed Nickel, White Compatible Fixture (Sold Separate...

Features Round scoop stainless steel trim for NM1-170. Easy install to threaded LED module, no tools are required Finish: Black, White Compat...

Features New construction frame-in can be used to assist installing can-less recessed downlighting. Helps indicate wiring location and cutting ...

Features Extension cables are used to extend the length between luminaire and driver enclosure. Can be connected together to create custom leng...

Features Extension cables are used to extend the length between luminaire and driver enclosure. Can be connected together to create custom leng...

Features Converts the round downlight included with 1″ M1+ LED downlight into a square downlight Finish: Black, Bronze, Matte Powder White Di...

Features Wire harness system is used to connect up to (6) NM1-170 to a compatible 12V LED driver on an evenly spaced wire. Each 6″ dropped is spac...

Features Splitter cable is used to connect up to (6) NM1-170 to a compatible 12V LED driver. Maximum length between luminaire and driver is 80’...

Features 24″ Hardwire Power Feed used to connect (1) NM1 LED module to a 12V LED driver. (1) Included with 12W Driver (NM1-DVR12), Splitter Cable ...

Features For new construction pre-wiring and easier layout planning Compatible Fixture (Sold Separately): Recessed Downlight: NM1-170 Doc...

An extension cable is used to extend the length between the luminaire (NM1-170) and a compatible 12V LED driver. Cables can be connected together t...

Trimless Mud Ring for 4" Pearl Round Trimless Features Allows 4" Pearl round trimless retrofits to be installed even no exposed flange and no exte...

New Construction Frame-In for 2″ Iolite Remodel IC AT Housing – Allows access from below. Features Recessed Size: 2" 2" New Construction flat fram...

New construction flat frame converts 1″ Iolite remodel housings. Allows access to driver from below the ceiling. Features Recessed Size: 1" 1" New...

Premium TIR optic for 6″ Cobalt Adjustable. Replaces included ring, must specify ring finish. Features Recessed Size: 6" Finish: Black, Bronze, Ha...

6″ Round eyelid clips on reflector to convert into half moon wall wash Features Recessed Size: 6" Finish: Black, Bronze, Matte Powder White, White...

6″ Round oversized ring covers ceiling cut-outs up to 8″ Features Recessed Size: 5" Finish: Black, Bronze, Matte Powder White, White Round oversiz...

Premium TIR optic for 5″ Cobalt Adjustable. Replaces included ring, must specify ring finish. Features Recessed Size: 5" Finish: Black, Bronze, Ha...

5″ Round eyelid clips on reflector to convert into half moon wall wash Features Recessed Size: 5" Finish: Black, Bronze, Matte Powder White, White...

5″ Round oversize ring covers ceiling cut-outs up to 7″ Features Recessed Size: 5" Finish: Black, Bronze, Matte Powder White, White Round oversize...

Premium TIR optic for 4″ Cobalt Adjustable. Replaces included ring, must specify ring finish. Features Recessed Size: 4" Finish: Black, Bronze, Ha...

4″ Round eyelid clips on reflector to convert into half moon wall wash Features Recessed Size: 4" Finish: Black, Bronze, Matte Powder White, White...

4″ Round oversize ring covers ceiling cut-outs up to 5-3/4″ Features Recessed Size: 4" Finish: Black, Bronze, Matte Powder White, White Round over...

5"/6" Oversize Ring for NOXTW-5631 or NOXAC-5631 Features Recessed Size: 5"/6" Finish: White Round oversize ring covers large ceiling cut-outs up ...

5"/6" Eyelid for NOXTW-5631 or NOXAC-5631 Features Recessed Size: 5"/6" Finish: White Round eyelid clips on reflector or baffle to convert into ha...

5"/6" Baffle Insert for NOXTW-5631 or NOXAC-5631 Features Recessed Size: 5"/6" Finish: Black, White Round baffle insert is field changeable used t...

5"/6" Reflector Insert for NOXTW-5631 or NOXAC-5631 Features Recessed Size: 5"/6" Finish: Black, Clear Diffused, Haze Round reflector insert is fi...

4" Oversize Ring for NOXTW-431 or NOXAC-431 Features Recessed Size: 4" Finish: White Round oversize ring covers large ceiling cut-outs up to 5-7/8...

4" Eyelid for NOXTW-431 or NOXAC-431 Features Recessed Size: 4" Finish: White Round eyelid clips on reflector or baffle to convert into half moon ...

4" Baffle Insert for NOXTW-431 or NOXAC-431 Features Recessed Size: 4" Finish: Black, White Round baffle insert is field changeable used to conver...

4" Reflector Insert for NOXTW-431 or NOXAC-431 Features Recessed Size: 4" Finish: Black, Diffused Clear, Haze Round reflector insert is field chan...

Features ***Limited Supply In Stock. Same Day Shipping Available*** Reflector for 2" and 4" Iolite trims only