Nora

Luz de emergencia LED de perfil pequeño con control remoto y autodiagnóstico. La luminaria proporciona 90 minutos de luz desde dos cab...

Características Vivienda vendida por separado. Tamaño: 4" Estilo de moldura: Deflector Lámparas: LED Potencia: 10W Lúmenes: 650 lm ...

Características Los adornos se venden por separado Las carcasas "IC" están clasificadas para contacto directo; no se requiere espacio libre...

Las viviendas de remodelación superficial dedicadas a techos aislantes pueden estar en contacto directo con el aislamiento térmico. Su construcció...

Presupuesto Sistema Sistema H Forma Redondo, cuadrado Finalizar Blanco, negro, plata Descripción ...

Features Local control of CCT, on/off with memory and dimming Mounting back box Included Requires: 24V LED driver Compatible Fixtures (Sold Separ...

Features 10′ Power Line Connector is used to connect LED Driver to Power Line Interconnector Compatible Driver (Sold Separately): Driver - ...

Features 30′ Power Line Connector is used to connect LED Driver to Power Line Interconnector Compatible Fixtures (Sold Separately): Driver...

12V plug-in driver to be used with Nora Lighting’s 12 Volt systems. Direct connection to a wall outlet. Features Input Voltage: 120V Output Vo...

12V plug-in driver to be used with Nora Lighting’s 12 Volt systems. Direct connection to a wall outlet. Features Input Voltage: 120V Output Vo...

Features Input Voltage: 120V Output Voltage: 12V DC Wattage: 60W Load: Operates loads up to 80% for best performance Dimming: Triac or ELV...

Splits the connection from one Tape Light or Driver onto two separate Tape Lights. Features Finish: White Allows splitting the RGB Tape light from...

Splits the connection from one Tape Light or Driver onto three separate Tape Lights. Features Finish: White Allows splitting the RGB Tape light fr...

The 2″ interconnection cable allows for the linking of any two CCT Tape Light runs in any direction. Interconnection cables can be joined together ...

The 6″ interconnection cable allows for the linking of any two CCT Tape Light runs in any direction. Interconnection cables can be joined together ...

The 8″ interconnection cable allows for the linking of any two CCT Tape Light runs in any direction. Interconnection cables can be joined together ...

The 12" power line interconnector cable allows for easy connection to any CCT controller with NARGBW-710W-M. One is included and connected with eac...

The 18″ interconnection cable allows for the linking of any two CCT Tape Light runs in any direction. Interconnection cables can be joined together...

The 36″ interconnection cable allows for the linking of any two CCT Tape Light runs in any direction. Interconnection cables can be joined together...

Required for each 24V RGB LED Tape Light run. Features A controller is required for each RGB LED tape light run Input Wire: 9-1/2" (10-ft NARGB-76...

Used to mount Tape Light. Includes screws.  Features Sold in pack of 15 Pack of 15 clear acrylic mounting clips are included with every Tape Ligh...

Features Splits power line connector from LED drivers into two separate leads, requires power line cable Voltage: 12V or 24V Finish: White ...

Use to seal connection made in the field. Sold in pack of 5. Features Sold in pack of 5 Two shrink wrap tubes are included with every Tape Light r...

Features Finish: White Used to cover open end of Tape Light. Compatible Fixtures (Sold Separately): LED Tape Light: NUTP10-WCCT/4 , NUTP10-WCCT/...

Features Finish: White Plastic wire J-clips for cable management Pack includes 10 total Compatible Fixture (Sold Separately): LED Tape Light...

Features Finish: White Plastic over the wire clips for cable management Pack includes 10 total Compatible Fixture (Sold Separately): LED Ta...

Features Finish: White Plastic square wire clips for cable management Pack includes 10 total Compatible Fixture (Sold Separately): LED Tape...

Features Finish: Black Terminal Block for connecting low voltage wires together. 4-in / 4-out Compatible Fixture (Sold Separately): LED ...

Features Finish: Black Terminal Block for connecting low voltage wires together. 8-in / 8-out Compatible Fixture (Sold Separately): LED ...

Features Used to join Romex low voltage lead to low voltage power line connector or interconnector Compatible Fixtures  (Sold Separately): T...

Features Length: 24" Finish: Black, White 2 foot Plastic Wire Raceway – Field cuttable – Includes wire channel with double faced tape and cover...

12V enclosed dimmable driver to be used with Nora Lighting’s 12 Volt systems. Features Wattage: 60W  Input Voltage: 120-277V Output Voltage: 12V...

24V plug-in driver to be used with Nora Lighting’s 24 Volt systems. Direct connection to a wall outlet. Features Wattage: 24W  Input Voltage: AC ...

Controlador LED enchufable de 24 V y 45 W Características Acabado: Blanco Potencia: 45W Voltaje de entrada: 120 V Voltaje de salida: 2...

Controlador LED enchufable de 24 V y 96 W con clasificación de clase II Características Acabado: Blanco Potencia: 96W Voltaje de entrada...

Se requiere un controlador RF para las tiras de luz LED RGBW o CCT. Se instala entre el controlador y el interconector de la línea de alimentación....

Se utiliza para programar luces de cinta RGBW o CCT con ciertas configuraciones de color. El control remoto se puede usar a una distancia de hasta ...

4′ Shallow recessed channel to mount low voltage tape lights flush with surface. Features Finish: Aluminum Aluminum extrusion Field cuttable Rece...

4′ Shallow Channel to mount low voltage tape light on a surface. Features Finish: Aluminum, Black, White Aluminum extrusion Field cuttable Surface...

4′ Deep recessed channel to mount low voltage tape lights flush with surface. Features Finish: Aluminum Aluminum extrusion Field cuttable Recessed...

4′ Deep Channel to mount low voltage tape light on a surface. Features Finish: Aluminum, White Aluminum extrusion Field cuttable Surface mount ins...

4′ J-Style channel to mount low voltage tape light on a surface indirectly. Features Finish: Aluminum Aluminum extrusion Field cuttable Surface mo...

4′ Corner channel to mount low voltage tape light in the corner to aim at 45°. Features Finish: Aluminum, Black, White Aluminum extrusion Field cu...

4′ Deep recessed channel to mount 120V tape light flush with surface. Features Finish: Aluminum Aluminum extrusion Field cuttable Recessed instal...

4′ Deep Channel to mount 120V tape light on a surface. Features Finish: Aluminum, White Aluminum extrusion Field cuttable Surface mount installati...

Surge Protector for 120V LED Tape Light. Recommended when installed outdoors or longer run lengths. Compatible with hardwire tape light only. Featu...

Pair of two mounting clips for 120V LED Tape Light. Each 12″ section of tape light includes two mounting clips. Features Sold in pack of 2 Two Mou...

NEXUS simplifica los sistemas de iluminación LED al combinar un regulador de intensidad LED de pared y una fuente de alimentación en una sola unida...